How to Paint on Plastic

Опубликовал Admin
25-08-2021, 16:10
618
0
Plastic is a tricky surface to paint. Unlike wood, plastic is not porous, so the paint has little to stick to. With the right amount of preparation, however, you can paint plastic with success. Keep in mind, however, that depending on the type of paint and plastic you are working with, the paint may eventually chip off, especially after heavy or frequent use.

Preparing the Surface

  1. Choose a plastic item to paint. With the right preparation, you can paint just about anything. Items such as furniture, figurines, toys, containers, and décor items are great choices.
  2. Clean the item with mild dish soap and warm water. This will remove any surface dirt and reduce the amount of work you have to do in later steps. Use a soft cloth or sponge for smooth surfaces, and a scrubbing brush for textured surfaces (such as patio furniture). Rinse the item with fresh water afterwards, then dry it off.
  3. Lightly buff the surface with 220 to 300-grit sandpaper. Use a light touch and a circular motion to avoid scratches. When you are done, wipe the surface down with a tack cloth.
    • Sanding is important. It gives smooth surfaces some tooth, allowing the paint to stick on better
  4. Wipe down the surface down with rubbing alcohol. This step is very important, as it will remove any oils that might prevent the paint from sticking. If you don't do this, the paint is more likely to chip off later.
  5. Mask off any parts that you do not want to be painted with painter's tape. This would be a good idea even if you will be painting the item with a brush. The masking tape will help give you a clean, defined line between the painted and unpainted areas.
  6. Apply a coat of primer. You’ll need to apply a coat of primer, preferably one that bonds well. This will help even out the surface of the plastic and give the paint something to stick to. The spray-on kind would be the easiest to use, but you can get the brush-on kind as well.
    • Let the primer dry completely before proceeding.
    • If you are using a spray-able primer, be sure to cover your work surface and work in a well-ventilated area.

Painting the Surface

  1. Set up your workspace. Choose an area with good lighting. Cover your work surface with newspaper or a cheap, plastic, tablecloth. If you will be working with spray paint, it would be best if you work in a well-ventilated area; outside would be best.
    • If there are any places on your plastic you do not wish to paint, cover them in painter's tape.
  2. Choose a paint that is suitable for plastic. Spray paint works especially well for plastic, but you can use acrylic or enamel/model paint as well. It would be even better if the paint is meant for plastic. Check the label, and look for words such as: "Plastic" or "Multi-Surface."
  3. Prepare the paint, if needed. Some types of paint come ready to use, while others require a little bit of preparation. Before you begin painting, check the label on your can or bottle of paint for any specific instructions.
    • Shake spray paint cans for a few minutes. This will ready the paint to spray, mixing it and giving you a smoother application.
    • Thin acrylic paint with enough water to give it the consistency of creamer. This will give you a smoother application and help reduce brushstrokes.
    • Some model/enamel paints need to be thinned as well. In most cases, you will need to use a paint thinner formulated for enamel paints; it's typically sold alongside the other enamel paints.
  4. Apply a light, even coat of paint. Don't worry if the first coat of paint doesn't cover the entire surface; you will be applying several coats of paint. This is important, whether you are spraying or brushing the paint on.
    • Hold spray cans 12 to 18 inches (30 to 46 centimeters) away from the surface. Apply the paint in a sweeping motion.
    • Apply acrylic paints using a taklon, kanekalon, or sable brush.
    • Apply enamel/model paints using a stiff-bristle brush. They are typically sold alongside the other model paints.
  5. Apply more light coats of paint. Allow each coat of paint to dry before applying the next one. Alternate the directions you paint in for each layer: side-to-side for the first layer, top-to-bottom for the second layer, etc. How many layers you apply depends on the coverage you need. In most cases, you'll only need 2 to 3 coats.
  6. Let the paint to dry completely after your final coat. At this point, your project is complete and ready to use. If you'd like to add some details or a top coat, read on to the next part.
    • If you applied masking tape earlier, you should remove it now. Peel it away carefully so that you don't accidentally chip the paint.

Touching Up and Sealing the Surface

  1. Fill in any chips or bare patches with a brush. Carefully inspect your piece. If there are any bare patches or chips, fill them in with more paint and a thin brush. If you used spray paint earlier, you might want to use acrylic paint in a matching color and finish for this step.
  2. Add some details, stencils, or weather, if desired. This step is completely optional, but it can bring more life and character to your piece, especially if it is a prop or figurine. Here are some ideas to get you started:
    • Apply stencils to the piece, then paint over them with spray paint or acrylic paint and a foam brush.
    • Use a thin, pointed brush to paint on delicate scrollwork or designs.
    • Add highlights with lighter shades of your paint color, and shadows with darker shades.
  3. Apply a light coat of polyurethane sealer for extra-durability, if desired. You can use the spray-on or the brush-on kind, but the spray-on kind will give you a smoother finish, however. Apply a single, light coat, then let it dry for at least 30 minutes. Apply one to two more coats, if needed, allowing 30 minutes between each one.
    • Choose a sealer in a finish that appeals to you: matte, satin, or glossy.
    • Several light coats of sealer are better than one thick coat. If you apply the sealer too thickly, it may turn out tacky.
  4. Allow the paint and sealer to dry completely. Just because something feels dry to the touch does not mean that it is dry throughout. Check the label of your paint and sealer bottle, and see if there are any drying or curing times.
    • Many enamel-based paints require several days to cure. During this time, they may be sticky and prone to peeling or chipping.

Tips

  • If the spray paint is starting to drop or pool, you are applying it too thickly. Move the can further away from the item and spray it in a fanning motion.
  • Some types of paint will be more durable than others. For best results, look for paints that are specifically labeled for use on plastic.
  • If you are simply painting details onto plastic, such as flowers, choose a paint finish the matches the plastic: shiny or matte.
  • If you are painting a multi-sided object, such as a box, work one side at a time.
  • If you will be painting only part of the plastic, you may want to skip the sanding step, otherwise the change in texture may be obvious.

Warnings

  • Some types of plastic will repel paint, regardless of your preparation. There is little you can do in this case.
  • Always work in a well-ventilated area to avoid inhaling toxic fumes from the paint, sealer, or mineral spirits.
  • Items that will see constant use may stat to chip over time.

Things You'll Need

  • Plastic item
  • Masking tape
  • Painter’s rags
  • Fine-grit sandpaper
  • Tack cloth
  • Mild dish soap and water
  • Rubbing alcohol
  • Newspaper
  • Spray paint, acrylic paint, or enamel paint
  • Paintbrushes (if using acrylic or enamel paint)
  • Painter's tape (optional)
  • Paint primer (optional)
  • Sealer (optional)
Теги:
Information
Users of Guests are not allowed to comment this publication.